CRYO-LINE
Manual for installation and use
OPTIKON 2000
Code 131002 EN
2014-02-06 Rev.F
3-2
•
Before using a surgical or non-surgical accessory with the CRYO-LINE unit, verify its
compatibility with the CRYO-LINE apparatus, declared on the documents attached
to the individual accessories.
•
The sound emission capacity of the apparatus is checked at the start-up. Verify that
an acoustic signal is emitted during system initialization.
•
The computer connection is designed for technical service procedures only. During
surgical use of the apparatus, do not connect external devices to the serial port
located on the rear panel.
•
To avoid damage to the probe, protect the gas connector with the protective cap
before cleaning and sterilization.
•
If the probe’s rapid defrost circuit malfunctions, press the Vent button for an
emergency rapid defrost. Notify the Optikon service centre. Do not use the
instrument until it has been repaired.
•
To avoid damage to the probe’s cable, do not bend it but wind it up in the
sterilization box with a minimum radius of 5 cm.
•
If you notice gas leaking from the probe, do not use the probe; send the defective
probe to the Optikon service centre.
•
Use of accessories and cables other than those provided with the unit may result in
an increase of the emissions or in decreased immunity of the system. Portable and
mobile communications equipment can affect the performance of the unit.
•
Carefully follow the instructions when installing and using the unit , in order to
prevent harmful interferences with other devices in the vicinity. If the unit causes
harmful interferences to other devices (determined by turning the unit off and on),
the user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the other devices.
•
Increase the distance between the equipment.
•
Connect the unit into an outlet on a circuit different from that to which the other
devices are connected.
•
Consult your local distributor or OPTIKON 2000 technical assistance.
Environmental warnings
•
Due to the risk of possible fires or explosions, never use the system in the presence
of open flames.