Optika OPTIStar OS-SZ1, Инструкция по эксплуатации

Страница: 13 / 138

Page 13
8. Use of the microscope
F Fig. 26 ig. 26
F Fig. 27 ig. 27
F F ig. 29 ig. 29
②
①
F Fig. 28 ig. 28
HOLD
INCREASE
DECREASE
③
8.1 Adjusting interpupillary distance
1. Hold the right and left eyepiece tube with both hands and ad -
just the interpupillary distance by moving the two parts until
one circle of light can be seen. (Fig. 26)
• If two circles appear, the interpupillary distance is too big,
and if two overlapped circles appear, the interpupillary dis -
tance is too small.
8.2 Focusing
Put the sample to be observed on the stage plate and focus the
sample using the focusing knobs ① .
• If necessary adjust the height of the microscope head along
the vertical stand.
• Remember to lock the fixing knob ② after setting the height
of the microscope. (Fig. 27)
8.3 Adjusting the tension of the focus knob
• This adjustment allows to increase or decrease the ten-
sion of the knob by avoiding an involuntary descent of
the microscope body under its own weight. Adjust the
tension just above the point where the focus is stable.
1. Grab the knobs ③ both hands and, while holding the left
knob, turn the right knob.
• The tension increases or decreases depending on the direc -
tion of rotation of the right knob. (Fig. 28)
8.4 Diopter compensation
• This compensation makes possible for people wearing
glasses to adjust the microscope to their eyes and use
the microscope without glasses.
1. Put the zoom down to the lowest magnification
④
and focus
the specimen with the focusing knobs
⑤
. (Fig. 29)
2. Put the zoom to the maximum magnification and repeat the
focusing.
3. Return to the lowest magnification: the specimen will be out
of focus.
⑤
④