Optika Italy B-60 Series, Инструкция по эксплуатации

Страница: 9 / 108

Page 9
F Fig. 1 ig. 1
F Fig. 2 ig. 2 ①
F Fig. 4 ig. 4
③
F Fig. 3 ig. 3
②
F Fig. 4 ig. 4
8. Assembling
8.1 Microscope assembling
The microscope comes already assembled from the factory. No
assembling procedure is requested.
• It is necessary to use 3x AAA rechargeable NiMh 1.2V.
1. Open the battery compartment placed in the lower part of the
frame. (Fig. 1)
2. Insert batteries, respecting polarity.
3. Close the battery compartment.
4. Plug the jack of the power supply into the socket
①
in the
back side of the microscope. (Fig. 2)
8.2 Polarizing set (optional)
1. Place the polarizer on the light exit lens
②
at the base of the
microscope. (Fig. 3)
2. Using a flat screwdriver (not provided) loosen the fixing
screws on the two sides of the microscope
③
. (Fig. 4)