Optiguard sp. z o.o.
ul. Aleksandrowska 6-10, 87-100 Toruń
NIP 956-213-03-91
Phone +48 56
654 71 33
2 / 5
USER MANUAL
Basic technical data of the C4 Elypse Power/IQ central unit:
- Maximum number of supported sensors in the basic configuration: ………………............................ 4
- Powering from an external power supply : ...........................5V / 2A Secu | 19V / 3,42 A Power and IQ
- Power supply connector: ……………………………………………………USB-A for Secu | DC 2.5 for Power and IQ
- Powering from the built-in battery: ………….3,7V/1800mAh for Secu and IQ | 3,7V/200 mAh for Power
- Built-in acoustic signaler with the following level : …................................................................. 90dB
- Dimensions of the casing : ..............................................................…..................... 107 x 82 x 51 mm
- Controlling using an IR remote control through an external EPS signaler or built-in a central unit IR receiver.
Technical data and central unit C4 Elypse versions
Central unit versions and application:
* the total number of charged products depends on the individual product’s technical charging parameters.
3)
DESCRIPTION OF USER AND SHOP REMOTE CONTROLS AND THEIR FUNCTIONS
Remote controls are devices for controlling the work of a central unit. By using USER remote controls one can arm and disarm a central unit, whereas thanks to a SHOP user
one can add another USER remote controls to a central unit. In order to optimally use functions of a remote control one has to adhere to the instruction manual and follow
the safety indications, such as:
- do not expose a remote control to mechanical shock
- do not store a remote control in wet areas
- do not store a remote control in high temperature areas
- protect a remote control from dust
Basic technical data:
- Remote controls are powered with Li-Ion batteries of CR2032 type (220 mAh).
- Remote controls communicate with a central unit via infrared.
- Effective area of remote control’s work is up to 0,5m from the IR receiver at an angle not exceeding 15
o
:
Specific conditions may affect the proper work of a remote control:
- The work of a remote control may be disrupted by a bright light. In such case one has to
decrease the distance between the remote control and the IR receiver.
- Objects in between a remote control and IR receiver may disrupt the work of the remote control.
- A discharged battery affects the power of the signal emitted by a remote control.
- One has to remember which remote controls are programmed to which central units.
CAUTION!!!
If a remote control stops working or starts working improperly one has to send it back to OPTIGUARD® for repair. It is explicitly forbidden to open a remote
control’s casing and mess with its components throughout the whole warranty period.
CAUTION!!!
Due to safety precautions if any remote control is lost then one has to erase the central unit’s memory and program all remote controls once again.
Central unit model
Technical data
C4 Elypse Secu
C4 Elypse IQ
C4 Elypse Power
Powering central unit
microUSB charger
19V 3.42A power supply
19V 3.42A power supply
Powering protected devices
-
4 outputs charging protected products:
- with low power consumption
(e.g. phones, MP3 players, satnav devices)
- with high power consumption
(e.g. camcorders, tablets and cameras)
4 outputs charging protected products:
- with low power consumption
(e.g. phones, MP3 players, satnav devices)
- with high power consumption
(e.g. camcorders, tablets and cameras)
Maximum overload of one port
-
2A
2A
Maximum overload of the
whole central unit
-
8A
8A
