Installation
STEP1
Plug the provided AC power cord to the AC/DC power adaptor then plug
the DC cord to the +12VDC receptacle on the front panel.
STEP2
Press POWER button on the front panel then Red LED will be lit on
STEP3
The system is now ready to operate and connect each device.
Technical Note:
For further extension, you might use optical DVI cables or
modules instead of copper cables. You could apply Opticis Co., Ltd Optical
DVI Extension Cables or Modules.
1-5 Installation
Mechanical Specification
Dimensions
- OKVM-41U -
- OKVM-21U -
OKVM-41U/21U: 442x60x43 mm
/ 1.5 Kg
< Front >
*PC1 ~ PC4: Source (PC) Selection Button
*Local LED: Status of connected KVM Extender (Local)
*Operator: Status of connected KVM Extender (Operate)
< Rear >
*DC +12V: DC Power 12V Input
*RS-232C: Com Port for Function Control
*REMOTE: Communication Port for Keypad
*PC1 ~ PC4: DVI, Stereo Audio, and USB Inputs
*MONITOR: DVI, Stereo Audio and USB Outputs
*DOWNLOAD: Firmware Upgrade Port
1-6 Mechanical Specification
