Troubleshooting
The display shows black screen
.
- Ensure that all plugs and jacks used by USB power supplies are firmly
connected. Ensure that the LED is ON.
- Ensure that the HDMI connectors are firmly plugged in to the HDMI source and
display.
- Ensure that the transmitter and receiver modules are plugged correctly to the
source and display.
- Check if the HDMI source and display are powered on and properly booted.
- Reset the system by de-plugging and re-plugging the transmitter HDMI or
receiver HDMI, or by de-plugging and re-plugging the USB power cables that are
plugged to the transmitter and receiver module
- Re-boot the system while connecting the module.
Screen is distorted or has noises.
- Check if the graphic resolution is properly set. Go to the display properties and
tap the settings. Ensure that the resolution sets less than 4K UHD (4096x2160) at
60Hz refresh ratio.
- Reset the system
- Power down, disconnect and reconnect the optical system cable or USB power
adaptors, and power up
Maintenance
No special maintenance is required for the optical system cables and power
supplies. Ensure that the cables and power modules are stored or used in a
benign environment free from liquid or dirt contamination.
There are no user serviceable parts. Refer all service and repair issues to
Opticis
USA
or its authorized distributor.
Product Specifications
Supports HDMI 2.0 standards feature
Extension limit:
200m (656feet) for 4K UHD (4096x2160) at 60 Hz
(RGB & YCbCr : 4:4:4) refresh rate
over two (2) LC OM3 fibers
(50/125um).
Graphic Transmission Bandwidth:
Supports total data rate
18Gbps (6Gbps per Channel).
Complies
CEC, EDID & HDCP 2.2
Prevents
accidental disconnection by using
High-Retention HDMI
connector
Supports
HDR
at 10 bit or 12 bit speed respectively within its
maximum bandwidth, 18Gbps
Mechanical specifications of transmitter and receiver
Dimensions
(WDH)
:
26mm x 72mm x 15mm
Environmental Specifications
Operating temperature: 0°C to 50°C
Storage temperature: -30°C to 70°C
Humidity: 10% to 85%
AC/DC Power Adapter
Power Input:
AC 100-240V, 50/60Hz.
Power Output:
+5 V, 1A SMPS DC-power Adapter
.
Technical Support and Service
General Inquires:
Tech Support:
Visit us at
www.opticisusa.com
to learn more about Opticis products.
