Specifications & Eyepieces
Getting Started
Your IS 60 R fieldscope will bring a new dimension to long range observation bringing far away subjects into clear
and sharp focus.
1. To minimize image shake caused by the high magnification, the instrument should be supported using a suitable
tripod or mount.
2. Connect the fieldscope to the tripod or mount using the tripod socket located on the underside of the tripod sleeve.
3. Make sure the eyepiece is attached securely. The retractable rubber eyecup should be used in the down position
when wearing glasses. This ensures the maximum available field of view is obtained. Be sure to return the
eyecup to the up position if you or anybody else wants to view without glasses.
4. To focus, locate the subject in the center of the field of view and rotate the focus wheel until the subject comes
into sharp focus.
5. If you are using a variable magnification or zoom eyepiece set the magnification to minimum when trying
to locate your subject, only zooming once the subject is centered. With some eyepieces a small amount of
refocusing may be required as the zoom is adjusted.
6. The retractable lens hood should be extended when viewing in bright sunlight.
WARNING. Never under any circumstances use a fieldscope to view the sun. Doing so will cause serious damage
to your eyes.
Specifications
60
60/45
60 ED
60 ED/45
Code
Objective (mm)
Close Focus (ft/m)
Length (in/mm)
Weight (oz/g)
41180
60
23/7
10/255
30.1/852
41181
60
23/7
10.6/270
30.5/864
41182
60
23/7
10/255
32.2/913
41183
60
23/7
10.6/270
33.4/948
Eyepieces • IS • HR
Code
Magnification
Field (ft/1000yd)
Field (m/1000m)
Eyerelief (mm)
40918S
18-54x
90/39
30/13
34-18
40933S*
16-48x
135/69
45/23
18-14
*40928S adapter required
