Getting Started
Eyepieces
Your MM3 travelscope will bring a new dimension to long range observation bringing far away subjects into clear
and sharp focus.
1. To minimise image shake caused by the high magnification, the instrument should be supported using a suitable
tripod or mount.
2. Connect the fieldscope to the tripod or mount using the tripod socket located on the underside of the tripod sleeve.
3. Make sure the eyepiece is attached securely. The retractable rubber eyecup should be used in the down position
when wearing glasses. This ensures the maximum available field of view is obtained. Be sure to return the
eyecup to the up position if you or anybody else wants to view without glasses.
4. To focus, locate the subject in the centre of the field of view and rotate the focus wheel until the subject comes
into sharp focus. At high magnifications when depth of focus is shorter use the fine focus adjustment for greater
accuracy.
5. If you are using a variable magnification or zoom eyepiece set the magnification to minimum when trying
to locate your subject, only zooming once the subject is centred. With some eyepieces a small amount of
refocusing may be required as the zoom is adjusted.
WARNING. Never under any circumstances use a fieldscope to view the sun. Doing so will cause serious damage
to your eyes.
Eyepieces • SDLv2 • HDF • HR/HR2
Product Code
Magnification 50
Magnification 60
Eye relief (mm)
40936M
12-36x
15-45x
20-18
40810M
13xWW
17xWW
22
40809M
18xWW
23xWW
18
40858M
24xWW
32xWW
17
40860M
45xWA
58xWA
15
40861M
57x
72x
16
40862M
12-36x
15-45x
22-17
40930M
15xWA
20xWA
18
40931M
20xWA
25xWA
17
40933M
1
13-39x
16-48x
18-14
1
40927S eyepiece adapter required
