background image

Contents
41114 Photoadapter Push Fit SDL
41120 44~42 Step Ring
41123 44~28 Step Ring
Hexagonal key 0.7mm 

The 41114 Photoadapter Push Fit SDL 
connects HR, ES, GS & MM3 telescopes 
fitted with SDL 40935/40936 eyepieces 
to either SLR/compact system cameras 
(CSCs) or compact cameras with a 
compatible ø28mm lens mount or 
converter tube.
 
Assembly and Fitting (all camera types)
1.   Make sure the correct eyepiece is 

fitted securely to the telescope.

2.   Set the eyecup to the down position.

3.   Fit the correct step ring to the 

photoadapter; 44~42 for SLR/
compact system cameras, 44~28 for 
suitable compact cameras.

4.   (SLR/CSC only) Attach the 

optional 41115 SLR EP adapter. 
Recommended for use with 40935 
SDL eyepiece.

5.    Pre-set the eyepiece magnification 

according to set-up;

(i)   SLR + 40936 SDLv2 eyepiece.  

Set to lowest magnification.

(ii)   SLR + 40935 SDL eyepiece. Set to 

HR 66 36x, HR 80 48x, ES 80 40x
ES 100 54x, GS 52/MM3 50 24x
GS 665 32x.

(iii)  40936 SDLv2 or 40935 SDL 

ey 41115 SLR EP adapter. 

Set to lowest magnification.

(iv)   Compact  camera/camcorder. 

Set eyepiece to lowest magnification. 

6.   Place adapter over the eyepiece 

and push down until the internal 
wall contacts with the end of the 
eyepiece.

7.   Hold the main section of the adapter 

secure and tighten the locking screw.

8.   (SLRs & CSCs) Fit an appropriate 

T-mount between the SLR adapter or 
photoadapter and the camera body.

9.   (Compatible compact cameras) 

Connect the camera lens mount 
to the 28mm thread on the 
photoadapter.

Notes
1.   If you find the camera is at an odd angle 

when attached - loosen the locking ring, 
rotate the camera into line and re-tighten. 

2.  Focusing is facilitated on the telescope.
3.   Camera may need to be operated 

in manual mode with shutter locks 
disengaged where necessary. 

4.   The high magnification to aperture ratios 

result in slower shutter speeds compared 
with conventional telephoto lenses so 
choose an IS0 setting of 400. For 35mm 
SLRs 400 ASA film is recommended. If 
possible use a cable release or remote 
control to reduce camera shake when 
operating the shutter.

Отзывы: