manualshive.com logo in svg

Opticon UNIVERSAL MENU BOOK, Руководство по управлению

Поделиться
Скачать
Opticon UNIVERSAL MENU BOOK Скачать руководство пользователя страница 22

Interf

ace

2

OPTICON Universal menu book

U15

2.2. Keyboard wedge/USB options 

This paragraph describes the options which are 
relevant to readers with a wedge or USB 
interface. The following parameters can be 
configured: 

• keyboard language
• special options
• intercharacter delay

Because these options are interdependent, it is 
important to perform the configuration in the 
sequence given.

Please consult your sales office for keyboard 
layouts and language currently supported.

Keyboard wedge operation modes:

This mode enables or disables responses from 
PC wedge to the computer during booting. 
In normal cases, the keyboard handles the 
responses to the computer. The PC wedge is 
only listening in order to be aware of the 
keyboard state.

With keyboard:

Use this mode in case a keyboard is connected 
to the PC wedge Y-cable.
The wedge is only listening in case the 
computer is booting or when the wedge is idle.

Without keyboard:

Use this mode in case no keyboard is 
connected to the PC wedge Y-cable. In some 
cases this mode is required in case only a PC 
USB keyboard is connected. If this option is 
enable, the computer can  detect the wedge as 
a keyboard. In case the computer reports a 
keyboard error or in case no data is displayed, 
try this option. It is required to power OFF the 
PC, wait 10 seconds and power ON the PC 
again. Do not enable this option in case a 
keyboard is connected to the Y-cable.

The wedge is responding to all commands from 
the computer.

The ‘without keyboard’ option is only supported 
for PC/AT wedges.

SET

_ZZ_

With keyboard

KM

_KM_

Without keyboard

KL

_KL_

END

_ZZ_

Содержание UNIVERSAL MENU BOOK
























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды