RS-3000 Specifications Manual
10
4.6
Vibration Strength
The RS-3000 is guaranteed to withstand the conditions of the following vibration test.
Vibration Test: Increase the frequency of the vibration from 12Hz to 200Hz at accelerated
velocity 32.3m/s2(3.3G) for ten minutes. Continue this routine for 2 hours to X-direction, 2
hours to Y-direction and 4 hours to Z-direction.
4.7
Drop Impact Strength
The RS-3000 is guaranteed to withstand the conditions of the following drop test.
Drop test: Drop the RS-3000 10 times in total, at top, bottom, front, back, left, right, top-left,
top-right, bottom-left and bottom-right faces, from a height of 1.5 meters onto a concrete
floor.
5
Optical Specifications
5.1
Basic Optical Specifications
Specification
Characteristics
Scan method
CMOS array area sensor
(black and white)
Number of effective
pixels
(H) × (V)
640 × 480
Image capture speed
Frame rate
*1
100 fps
Sensor shutter speed
Minimum shutter speed
30μs
Focal distance
From the front edge of scan engine
115 mm
View angle
Horizontal
Approx. 38.0°
Vertical
Approx. 28.9°
Diagonal
Approx. 46.4°
Auxiliary light source
Warm white LED
-
Color temperature
2600 to 3700K
Maximum Optical Efficiency
*2
114 lm/W
Light source for aiming
Single Line Green LED
-
Peak Wavelength
535nm
Maximum Optical Efficiency
*2
87.4 lm/W
Minimum contrast
PCS
0.2
Minimum resolution
1D barcodes
0.1mm (4mil)
2D codes
0.169 (6.7 mil)
Barcode width
100mm
Pitch, Skew, and Tilt
Resp.
α
,
β
and
γ
α = ±65° β = ±65° γ = 360°
Curvature
Radius
R
≧
20 mm
Motion tolerance
Speed
2.54m/s
Decode rate
1D barcodes
40
2D codes
25
*1
The fastest speed of image capture.
*2
The reference value extracted from the LED datasheet.
Note
:
The same basic conditions apply as for the Environmental Specifications (See chapter 4)
Note
:
For more details on the optical specifications, refer to the MDI-4150 specifications manual.
