Opticon PHL 8000 series, Руководство пользователя, Страница: 92 / 113

Opticon
PHL 8000 series
User Manual
92
5. Software Applications
5.1. Introduction
The PDT includes Calculator , Inbox , etc.
You can switch to any software program by tapping the Start menu.
5.2. Software Applications
5.2.1.
Inbox
Use Inbox to send and receive email
messages in the following ways:
•
Synchronize email messages with
Microsoft Exchange or Outlook on
the host computer.
•
Send and receive email messages by
connecting directly to an email server
through an Internet server provider
(ISP) or a network.
To set up Inbox :
1. Select Start > Programs> Inbox to
open it.
2. Select Service > Options from the
command bar. Drag the dialog to
show the right edge to configure
email.
3. Select Add…
NOTE: To add a mail service, select Add . To remove a mail service, select the
service from the Installed service box and select Remove . To view a mail
service’s properties, select the service from the Installed service box and then
select Properties .
4. In the Service Type list, select POP3 Mail or IMAP4 Mail.
•
( POP3 is the most common mail protocol for ISPs). Enter a unique name
for the email service in the “ Service name ” field. This name cannot be
changed later.
5. Select OK.
6. The Mail Service Setup wizard appears after you add a service.
•
If you are adjusting the setting of an existing service, select Service>
Options , select the service you are using, and then Properties . In the
Service Definition dialog box, complete the following entries as needed:
Figure 5-103: Inbox