14
6
Software on the OPR3301
In the future more features (or bug fixes) will be implemented into the software of the
OPR3301. To find out if there are software (or manual) updates available, please check
our web site. All available software and documentation can be found under:
'Service and support' > 'Software' / 'Manuals' > 'OPR3301' at
www.opticon.com
.
6.1
Retrieving the current software version
If you want to check the currently installed software versions, it is possible to transmit
the software versions by first establishing a Bluetooth connection and then reading the
'Z1' menu label below (See also Universal menu book chapter 7.1). This will output the
software versions as either keyboard data or as serial data.
Show software version(s)
The retrieved software versions of the OPR3301 consist of 3 parts:
Operating System (OS). This part of the software controls all hardware and can
run an application. The software version of the OS will always have the following
format:
RBJVxxxx
where xxxx is the number software release
Application. This part of the software implements the user interface of the
OPR3301 like the handling of the trigger key and processing scanned barcodes
(transmit, store or configure). The software version of the application will usually
have the following format:
RFJ3553x
where x is the version number*
* Note: The OPR3301 has the ability to run customized applications (just like the
OPN2002 terminal). However, this manual will only describe the default application
for the OPR3301.
Boot loader. This part of the software boots the OPR3301. The boot loader is like
the BIOS of a PC. It is not subject to change in the future, so no boot loader
software updates will be available on our web site.
The software version of the boot loader will have the following format:
RAJVxxxx
where x is the version number
