0
1
2
3
4
5
6
7
8
9
PINE
Quick Start Instructions
Step 1
- Scan Bluetooth Mode
Scan the Bluetooth Default barcode that matches the connection
method you wish to use,
HID
(recommended),
SPP
or
Apple MFi
.
If you are pairing on an Apple iDevice, the on-screen keyboard can be
toggled with the OPN-3102i’s function key.
Step 2
- Hold the Function Key for 3 Seconds
Hold the OPN-3102i’s function key for 3 seconds until it makes a
short buzzer sound and begins to flash blue. The OPN-3102i is now
discoverable by your host device. This can be cancelled at any time by
holding the function key for another 3 seconds.
Step 3
- Perform Bluetooth Search on Host
Use the Bluetooth interface on your host device to search for and select
the OPN-3102i. The OPN-3102i will beep to indicate success or failure.
If you are pairing in Bluetooth-SPP or Apple MFi mode, the OPN-3102i
will complete the pairing process as soon as you launch an appropriate
application (i.e. OPNTerm for iDevices) and open the serial port created
by your Bluetooth software. If your host device does not support Simple
Pairing, then you may use the barcodes at left to input a PIN code.
SPP PIN code: input 1234 into host device
HID PIN code: Scan “PINE” from the “PIN code input” menu
For information about your OPN-3102i, including detailed setup
instructions, downloads and more, visit us at:
www.opticonusa.com/start/opn
