Opticon
OPL 2724
Specifications Manual
24
14. Reliability
MTBF (mean time between failures) of the laser scan engine is 10,000 hours, when the product
is not on all the time.
Keystroke verification: the expected lifetime of the trigger key is 500,000 uses when the key is
pressed with 2 kgf force.
The estimate of MTBF and product life cycle is based on standard operation of the product
within the recommended temperature range and without extreme electronic or mechanical
shock.
The MTTR (Mean Time To Repair) of this product is one hour.
15. Regulatory Compliance
15.1. Laser Safety
The scanner emits laser beams.
JIS C6802: 2005: Laser class 1
IEC 825-1/EN 60825-1: Laser class 1
FDA CDRH Laser class I. Complies with 21 CFR 1040.10 and 1040.11 except for
deviations pursuant to laser notice No. 50 dated June 24, 2007.
Class I1 laser devices are not considered to be hazardous when used for their intended
purpose. Avoid staring into the laser beam.
15.2. Product Safety
EN60950-1: 2001
IEC60950-1: 2001
15.3. EMC
EN55022
EN55024
VCCI Class B: This is a Class B product, to be used in a domestic environment based on
the Technical Requirement of the Voluntary Control Council for Interference from
Information Technology Equipment (VCCI). If this is used near a radio or television
receiver in a domestic environment, it may cause radio interference. Please install and
use the equipment according to the instruction manual.
FCC Part 15 Subpart B Class B: This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
15.4. RoHS
RoHS: The restriction of the use of certain hazardous substances in electrical and
electronic equipment, 2002/95 EC.
