OPTICON
User's manual
H-15AJ
1-2
1.2 User and Product Safety
•
Do not stare into the laser or LED beam directly or shine it into eyes.
•
Never use strong pressure onto the screen or subject it to severe impact, as
the LCD panel could become cracked and possibility cause personal injury. If
the LCD panel is broken, never touch the liquid inside because the liquid
irritates the skin.
•
Although the Terminal. has passed the test of IP54 standard for water and
dust resistance, avoid prolonged exposure to rain or other concentrated
moisture. Such conditions exceeds the IP54 standard, and could result in
water or other contaminants entering into the Terminal..
•
Use only the original approved AC Adapter with the Terminal.. Use of an
unapproved AC Adapter could result in electrical problems, or even cause a
fire or electrical shock to the user.
•
Do not disassemble the Terminal.. Servicing should be done by Opticon only.
If the Terminal. or accessories gets damaged due to wrong handling or
unauthorized repair, warranty is void. In case the warranty seals are broken,
warranty is void too.
•
Make regularly back-ups of all important data.
•
Under no circumstance will Opticon be liable for any direct, indirect,
consequential or incidental damages aging out of the use or inability to use
both the hardware and software and/or any data loss, even if Opticon has
been informed about the possibility of such damages.
LED AND LASER SAFETY INFORMATION
•
Class II Laser product.
•
Do not stare at the Laser or shine into eyes.
•
Do not allow young children to use the product without adult
supervision.
•
Do not replace/repair the Laser, these are not user replaceable.
•
Do not shine the Laser on a shiny reflective surface.
•
LASER RADIATION DO NOT STARE INTO BEAM CLASS 2 LASER
PRODUCT.
•
Complies with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007.
•
Laser Engine Maximum output 1.0mW. Wavelength 650nW.
