9
Use a flat screwdriver and push
here to unlock the EBS-50
3.4
Mounting
The EBS-50 comes with a mounting plate for easy mounting to e.g. a wall or the ceiling. The
EBS-50 can slide over the mounting plate to click and lock it into place. To unlock it, use a flat
screwdriver to push the locking tap down and then slide the EBS-50 away from the screwdriver.
Figure 3: Mounting plate
The mounting plate can be attached to a wall with two screws, spaced 40mm apart. The top of
the mounting plate, where the Opticon logo is visible, should face forward, away from the wall.
Once the mounting plate is attached, the EBS-50 can slide over the mounting plate until it locks
into position.
Figure 4: Attaching and detaching the EBS-50 to the mounting plate
Slide the EBS-50 over the mounting
plate in this direction to lock it in place
