OPTICOM SDVR 1600, Руководство пользователя, Страница: 24 / 49

24
3-6. Storage
User can set recording mode in the hard disk drive or initiate format of the hard disk drive.
Table 3.6.1. Storage setup
Item Description
OVERWRITE Overwrite existing material when hard disk drive is full
FORMAT Format hard disk drive
USB UPGRADE The firmware of DVR can be upgraded through USB port.
In order to upgrade, the upgrade firmware must firstly be downloaded and
copied into the USB device. Create a new folder in the USB memory stick and
copy the upgrade firmware “app.bin” into the folder. (This folder name should
be “upgrade”. )
After the upgrade firmware is copied into the USB memory stick, do the
following;
1. Connect USB memory stick onto the USB port.
2. Go to the STORAGE>USB UPGRADE.
3. Select CONFIRM and then the upgrading will start automatically.
4. After the upgrade is completed, DVR will reboot automatically.
SAVE SETUP TO A
USB
User can save the current configuration of DVR to the USB memory stick. Put
the USB stick on the front panel and press SEL to start the saving process
LOAD SETUP FROM A
USB
User can upload the configuration of DVR to another DVR using the USB
Memory stick. Put the USB stick on the front panel and press SEL to start the
loading process.
After upgrade is completed, DVR will reboot automatically and setup value will
be applied.
VIDEO DELETE Enable/disable recording limit.
DELETE VIDEO
AFTER
Set the limit days for recording to the hard disk drive from 1 to 60 days.