Welcome!
Congratulations on your purchase of the
Stretch
DVI
TM
DDFX-100-TR
Optical Dual Link DVI (Digital Visual Interface) Extension Module. This manual
contains information that will assist you in installing and operating the product.
Product Description
The
DDFX-100-TR
optical DVI module transmits uncompressed WQXGA
(2560x1600), 60Hz or WQUXGA (3840x2400), 33Hz vertical refresh rate of
Dual-link DVI up to 500 meters (1,640feet) over two (2) LC multi-mode fibers.
The EDID (Extended Display Identification Data) in a display can be read and
restored by just plugging once transmitter to the display. This
Self-EDID
programming
feature makes the installation of DDFX-100-TR more easy and
flexile at any variable resolution display systems. For your convenience,
WQXGA EDID had been stored before shipment as a default.
Shipping Group
DDFX-100-TR Optical Dual Link DVI Extension Module:
One (1)
pair
AC/DC power adapter:
Two (2) units of +5V, 1A
User
’s Manual
Option Product:
Duplex LC Patch Cord (Multi-mode fiber)
Figure 1
– Connection Diagram of Optical DVI Extension Module
1-1 Welcome, Product Description
Tw
o (
2) Op
tic
al Fiber
Up to 500m at WQUXGA (3840x2400) @33Hz
Dual link DVI Source
Dual link DVI Display
DDFX-100
Tx
DDFX-100
Rx
System Requirements for Setup
Hardware requirements
You have to have a DVI graphic controller or card having a DVI
port in your PC, SUN or Mac systems. It should support the
maximum graphic resolution feature of displays to be connected.
No special requirements for memory size, CPU speed and
chipsets, if you
’ve already properly installed your DVI graphic
controllers or cards.
Software requirements
No special restrictions, if you
’ve already properly installed your
DVI graphic controller in your OS.
AC/DC Power Adapter Technical Advisory
The transmitter (Tx) module of DDFX-100-TR is designed for power
protection circuit from conflict of power supply between the external
AC/DC power adapter and your DVI source by #14 pin.
We strongly recommend to use external AC/DC adapter for
Transmitter (Tx) for stable power supplying. In case of Receiver (Rx),
power should be supplied by AC/DC adapter due to no internal power
supplying from the displays.
1-2 System Requirements for Setup
