USER MANUAL
HDMI MATRIX ROUTER : OHM-88
OHM-88 Manual
Page 14
2.6.5
SUBNET MASK: press FUNCTION five times
The Under Bar mark represents selected and activated.
Pressing Input 1 button repeatedly changes the selected number from 0, 1, 2...9.
The Input 2 button decreases the number.
Input 3 and 4 buttons moves the Under Bar left and right.
=========Function Mode========
Subnet Mask
255. 255. 255. 000
255. 255. 255. 000
Factory setting is 255. 255. 255.000.
Press
ENTER
button to complete the process and return to the
User mode
.
2.6.6
IP ADDRESS: press FUNCTION six times
The Under Bar mark represents selected and activated.
Pressing Input 1 button repeatedly changes the selected number from 0, 1, 2...9.
The Input 2 button decreases the number.
Input 3 and 4 buttons moves the Under Bar left and right.
=========Function Mode========
IP Address
192. 168. 000. 088
192. 168. 000. 088
Factory setting is 192. 168. 000. 088.
Press
ENTER
button to complete the process and return to the
User mode
.
2.6.7
MAC ADDRESS: press FUNCTION seven times
In computer networking, a Media Access Control address (MAC address) is a
unique identifier assigned to most network adapters or network interface cards by
the manufacturer for identification, and used in the Media Access Control proto-
col sub layer. If assigned by the manufacturer, a MAC address usually encodes
the manufacturer's registered identification number. It may also be known as an
Ethernet Hardware Address (EHA), hardware address, adapter address, or
physical address.
There are three numbering spaces, managed by the Institute of Electrical
and Electronics Engineers (IEEE), which are in common use for formulating
a MAC address:
OHM-88 is shipped with a default MAC ADDRESS. The MAC ADDRESS of
OHM-88 can be edited, however, it is strongly not recommended.
Editing MAC ADDRESS
The Under Bar mark represents selected and activated.
Pressing Input 1 button repeatedly changes the selected number from 0,
1, 2...9.
