USER MANUAL
DVI MATRIX ROUTER
– ODM1818
ODM1818 Manual - Edition 7a
Page 11
2.5 CANCEL Mode
To Cancel each Input-Output configuration:
1) Press
CANCEL
then press the desired Input button to be cancelled. The configured
Output buttons LED will be on.
Press ENTER to complete cancellation.
2.6 FUNCTION Mode
Press FUNCTION to view features
– pressing FUNCTION repeatedly will cycle
the following features:
Monitor Output Selection
RS-232 Baud Rate
Gateway
Subnet Mask
IP Address
Mac Address
Port Number
EDID Save
Factory mode
2.6.1
MONITOR OUTPUT SELCTION
– To verify the video source press FUNCTION
key once.
1) Connect a display to the MONITORING port and any video sources to the DVI
Input ports on the rear panel.
2) Press the FUNCTION key once
– the LCD displays:
============ Monitor Mode ===========
Input Channel:
Press Input button of the Input to be monitored.
3) Press
ENTER
to finish the process.
4) If you want to keep the previous, press
CANCEL
.
[Note] For ODM1818, Output #1 will be disconnected automatically when monitoring port is
connected and working.
2.6.2
RS-232 BAUD RATE: press FUNCTION two times
Press Input 1 button for 19200
Press Input 2 button for 38400
Press Input 3 button for 57600
Press Input 4 button for 115200
