opticis HDWX-10-TR Скачать руководство пользователя страница 17

- 17 - 

 

The recycling of materials will help to conserve natural resources. For more detailed information about 

recycling of this product, please contact your local city office, your household waste disposal service 

or the shop where you purchased the product. 

 
 
 

FCC/CE Statement 
 

This device complies with part 15 of FCC Rules and EN 55022/55024/61000-3 for CE certification. 

Operation is subject to the following two conditions: (1) this device may not cause harmful 

interference, and (2) this device must accept any interference received, including interference that 

may cause undesired operation. This equipment has been tested and found to comply with the limits 

for a Class A digital device, pursuant to part 15 and 2 of FCC Rules and EN 55022/55024/61000-3 for 

CE certification. These limits are designed to provide reasonable protection against harmful 

interference when the equipment is operated in a residential installation. This equipment generates, 

uses, and can radiate radio frequency energy and. if not installed and used in accordance with the 

instruction guide, may cause harmful interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular installation. If this equipment does cause 

harmful interference to radio or television reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to correct the interference by one or more of the 

following measures: 

 

 

Re-orient or relocate the receiving antenna. 

 

Increase the separation between the equipment and the receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected. 

 

Consult a service representative for help. 

 

Properly shielded and grounded cables and connectors must be used in order to comply with FCC/CE 

emission limits. Changes or modifications not expressly approved by the party responsible for 

compliance could void the user s authority to operate the equipment.

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание HDWX-10-TR



















Отзывы: