Troubleshooting
The display shows only black screen
.
- Ensure that all plugs and jacks used by USB power supplies are firmly
connected. Ensure that the LED is ON.
- Ensure that the HDMI connectors are firmly plugged in to the HDMI source and
display.
- Ensure that the transmitter and receiver modules plugged correctly to the source
and display, respectively.
- Check if the HDMI source and display are powered on and properly booted.
- Reset the system by de-plugging and re-plugging the transmitter HDMI or
receiver HDMI, or by de-plugging and re-plugging the USB power cables that are
plugged of the transmitter and receiver module
- Re-boot up the system while connecting the module.
Screen is distorted or displays noises.
- Check if the graphic resolution is properly set. Go to the display properties and
tap the settings. Ensure that the resolution sets less than 4K UHD (4096x2160) at
60Hz refresh ratio.
- Reset the system
- Power down, disconnect and reconnect the optical system cable or USB power
adaptors, and power up
Maintenance
No special maintenance is required for the optical system cables and power
supplies. Ensure that the cables and power modules are stored or used in a
benign environment free from liquid or dirt contamination.
There are no user serviceable parts. Refer all service and repair issues to Opticis
or its authorized distributor.
Technical Support and Service
For commercial or general product support, contact your reseller. For technical
service, contact Opticis by email
1-5 Trouble Shooting, Maintenance, Technical Support
and Service
Product Specifications
Supports HDMI 2.0 standards feature
Extension limit:
200m (656feet) for 4K UHD (4096x2160) at 60 Hz
(RGB & YCbCr : 4:4:4) refresh rate
over one (1) LC OM3 fibers
(50/125um).
Graphic Transmission Bandwidth:
Supports total data rate
18Gbps (6Gbps per Channel).
Selectable Option: full interoperable with
HDFX-700-TR
as a pair
.
Complies
CEC, EDID & HDCP 2.2
Prevents
accidental disconnection by using
High-Retention HDMI
connector
Supports HDR at 10 bit or 12 bit speeds respectively within its
maximum bandwidth, 18Gbps
Mechanical specifications of transmitter and receiver
Dimensions
(WDH)
:
22mm x 67mm x 14mm
Environmental Specifications
Operating temperature: 0°C to 50°C
Storage temperature: -30°C to 70°C
Humidity: 10% to 85%
AC/DC Power Adapter
Power Input:
AC 100-240V, 50/60Hz.
Power Output:
+5 V, 1A SMPS DC-power Adapter
.
1-6 Product Specifications
