5
Please power on the receiver with 5V adapter and see the red LED indicator is
lighting up
Step 4:
Get the receiver well connected with DVI port on the display
Step 5:
Using the single model fiber cable well connect the receiver and transmitter
Step 6:
Turn on or power on the sources
Step 7:
Last step, if users using the Windows system, only need to set up the best resolution
which the display can support.
Note: If users using the IOS system, couldn
’
t see the original image after connection,
users have to repeat Step 1 and step 2 to set up.
8. Common issues and attentions
8.1 Common issues and maintenance
(1) Only black on the display?
Make sure all the power supply is tight and stable. Meanwhile, make sure the red
LED indicator light up.
Follow the Step 1 to make the EDID learning or coding successfully.
Make sure the extender connected with the DVI display tightly.
Make sure the receiver is connected with the display and the transmitter is well
connected with the input source.
Check the power supply for the sources and display is working good.
Try to plug-out or plug-in the extender again, or disconnect the power supply for a
few seconds and power on again.
(2) The image on the display is out of shape or noisy
Check the resolution is suitable or not.
Make sure the resolution is under 4K30Hz.
Disconnect the power supply and power on again or the DVI cable and restart the
extender
8.2 Attention
Please well protect the power cord, fiber cable, in case of the cable damage cause the
problem
Avoid any liquid, electronic or dusty staff get into the equipment.
Working temperature should between -10
℃
-50
℃
, and make sure the dry and cool
place
