Optical Systems OSD2151 SERIES, Руководство оператора, Страница: 13 / 20

OPTICAL SYSTEMS DESIGN
DOC ID: 10110603
OSD2151 OPERATOR MANUAL
PAGE 13
2.2.7
FITTING SFP CONNECTORS
Care should be taken when inserting/removing the SFP connectors from the SFP port as SFP modules
are Electrostatic (ES) sensitive and Electrostatic Discharge (ESD) precautions should be taken when
installing. Ensure that the SFP is fully engaged and latched into position.
Inserting SFP
– Ensure that the SFP lever is in the locked position and insert into appropriate SFP
port. Gently push the SFP until it locks into place. Remove plastic/rubber dust cap and fit appropriate
fiber cable.
Removing SFP – Remove fiber connector. Pull the SFP lever down to unlock SFP from housing.
Using the lever, gently pull the SFP out.
Fiber SFP
FIGURE 8: FITTING/REMOVING SFP CONNECTORS
2.2.8
BASIC CONNECTIONS
Figure 9 shows basic user connections to the OSD2151
FIGURE 9: BASIC CONNECTIONS
Inserting
SFP
Removing
SFP
1
2
Power
RJ45 Ethernet Cable
OSD2151
LC Fiber cable