Optical Systems Design OSD8327 Series, Руководство оператора

Страница: 9 / 20

OPTICAL SYSTEMS DESIGN
DOC ID: 10116601
OSD8327 OPERATOR MANUAL
PAGE 9
2.2.4
POWER SUPPLY CONNECTIONS
The OSD8327T and OSD8327R require external DC power. The voltage range is +10 to 28V
DC.
Power
should be connected to the power socket located on the front panel of the units and applied as indicated
below;
TABLE 2: OSD8327 DC POWER CONNECTION
External Power Pin Specification
Pin 1 Ground or 0V
Pin 2 +10 to 28V
DC
FIGURE 3: OSD8327 POWER SUPPLY CONNECTIONS
2.2.5
HD/SDI CONNECTIONS
The HD/SDI video-input signal (eg. from camera) is connected to the HD/SDI input BNC connector on
the OSD8327T. The OSD8327T also has two HD/SDI input monitor outputs.
Note: The OSD8327T
card version has only one monitor output.
FIGURE 4: OSD8327T VIDEO CONNECTIONS
Power Connector
1 2
HD/SDI Monitor
HD/SDI Input
HD/SDI Monitor