Doc. ID 10117901
Internal Switch Settings
Switches are accessible by carefully unscrewing the
spring mounting screw and removing the board from the
module housing.
Switch
Speed
10.3-11.7G
9.95-11.3G
8.5G
S1
On
Off
Off
S2
Off
Off
On
Switch
Position
Function
S3
On
SFP+1 Loopback is On
Off
Loopback is Off
S4
On
SFP+2 Loopback is On
Off
Loopback is Off
Note:
Power to the unit must be off when setting switches
Technical Specifications
Specification
Performance
Equipment Function
3R Repeater
Transmission Speed
8.5Gbs – 11.7Gbps
Access Type
10G LAN (10.3-11.7G)
10G WAN (9.95-11.3G)
Fiber Channel (8.5G)
Interface Type
SFP+ to SFP+
Power Requirements
100V
AC
to 240V
AC
Power Connector
IEC Plug (supplied)
Dimensions (mm)
156W x 128D x 32H
Weight of Module
0.76kg
Operating Temperature 0 to 50
°
C
Relative Humidity
5 to 90% non-condensing
▲
ELECTROMAGNETIC COMPATIBILITY
WARNING
: This is a Class A product. In a domestic
environment this product may cause radio interference
in which case the user may be required to take
adequate measures.
▲
OPTICAL OUTPUT OPERATION
WARNING
:
Laser Safety:
Class 1 Laser Product per
IEC/EN 60825-1:2014 standard.
Class 1
The OSD2801 is a
Class 1
laser product.
Precautions
▲
All service personnel should be provided training as
to the hazards of direct viewing of laser radiation and
of the precautionary measures during servicing of
equipment
▲
Areas where laser products are installed should be
restricted in access to trained service personnel only
and appropriate warning signs posted in the work
area.
▲
All laser apertures should be covered by protective
covers when not connected to optical fibers. Never
leave outputs uncovered.
▲
Laser equipment should be positioned above or
below eye level where possible. Apertures should be
positioned away from personnel
▲
Protective eyewear should be worn in the vicinity of
laser equipment
Warranty/Repairs
Thank you for purchasing equipment by Optical Systems Design
(OSD). OSD warrants that at the time of shipment, its products
are free from defects in material and workmanship and conforms
to specifications.
For warranty period and repair service please contact your local
OSD distributor.
OPTICAL SYSTEMS DESIGN PTY LTD
7/1 Vuko Place, Warriewood 2102.
PO Box 891, Mona Vale,
NSW, Australia 1660.
Phone: +61 2 9913 8540
Fax: +61 2 9913 8735
S
1
S
2
S
3
S
4
Spring
Mounting
Screw
