Optical Systems Design OSD2254P Series, Руководство оператора

Страница: 21 / 30

OPTICAL SYSTEMS DESIGN
DOC ID: 10115206
OSD2254P OPERATOR MANUAL
PAGE 21
2.5 COMMAND LINE INTERFACE
The Command Line Interface (CLI) is a useful tool for checking link status and debugging link
connections. To enable the use of CLI the OSD2254P must be connected to a PC with a serial port and
an appropriate cable as specified in section 2.2.6. Using a terminal emulation program such as
Hyperterminal, a number of command lines specific to the OSD2254P can be implemented to check
link/node status, ring/bus topology and enable/disable float backup.
2.5.1
TERMINAL EMULATION SETUP
Using a terminal emulation program such as hyperterminal the following parameters should be set up
for correct command line operation. Select the appropriate “COM port” set up for the serial port.
FIGURE 17: SERIAL PORT SETTINGS