OPTICAL SYSTEMS DESIGN
DOC ID: 10100306
OSD151 OPERATOR MANUAL
PAGE 5 OF 12
1.4
TECHNICAL SPECIFICATION
TABLE 2 below lists the Technical Specifications for the OSD151.
TABLE 2: TECHNICAL SPECIFICATIONS
SPECIFICATION
PERFORMANCE
Data rate
DC to 200kbps in asynchronous mode
1kbps to 2.5Mbps in synchronous mode
Pulse Distortion and Jitter
< ± 100ns over the full dynamic range for synchronous transmission
< ± 500ns over the full dynamic range for asynchronous transmission
Input
RS422 Levels
Output
RS422 Levels
Controls
Synchronous/Asynchronous selection
Optical Wavelength
850nm nominal (1310nm for OSD151L)
Optical Transmit Power
> –18 to 16dBm into 62.5/125multimode fiber
> –20 to -16dBm into singlemode fiber (OSD151L only)
Receiver Sensitivity
(for a BER of 1 x 10
–9
)
>
– 35dBm
Optical Loss Budget
> 17dB at 850nm (>5km of multimode fiber)
> 15dB at 1310nm (>25km of singlemode fiber)
Receiver Saturation
>
- 16dBm
Electrical Connector
25 Pin D connector (female) for power and data
Optical Connector
ST
Power Connector
1.3mm socket on side of case
Operating Temperature
-20 to + 75°C
Relative Humidity
0 to 95% non-condensing
Power
8V to 14V DC at less than 200mA via D connector or power socket
Weight
120g
Dimensions(mm)
15H X 54W X 93D
10215103