OPTi 619/5775, Сборка и инструкция пользователя

Страница: 21 / 27

20
Exercise Information
Console Operation
FUNCTIONAL BUTTON:
MODE/RESET
– Push down to select functions.
– Push down for 3 seconds to reset Speed, Distance, Time, Calories and Pulse.
FUNCTIONS AND OPERATION
1. SCAN:
Press MODE button until “ ▼ ” appears at SCAN position, the monitor will rotate through
t he following functions: Time, Distance, , Calories ,Odometer and Pulse. Each display will be
held for 6 seconds.
2 . SPEED:
Display current speed.
3 . DISTANCE:
Count the distance from exercise start to end.
4 . TIME :
Count the total time from exercise start to end.
5. CALORIES:
Count the total calories from exercise start to end.
6. ODOMETER:
The monitor will display the total accumulated distance.
7. PULSE:
Press MODE button until “ ▼ ” appears at PULSE position.
1. If the display is faint or shows no figures, please replace the batteries.
2. The monitor will automatically shut off if there is no signal received after 4 minutes .
3. The monitor will be auto-powered on when starting to exercise push button with signal in.
4. The monitor will automatically start calculating when you start to exercise and will stop calculating when
you stop exercising for 4 seconds .
SPECIFICATIONS:
FUNCTION
AUTO SCAN Every 6 seconds
TIME 00:00’~99:59’ (Minute:Second)
CURRENT SPEED The maximum signal can be pickup is 99.9KM/H
TRIP DISTANCE 0.00~9999KM
CALORIES 0.1~999.9kCAL
ODO 0~9999KM
PULSE RATE 40~240BPM
BATTERY TYPE 2 pcs of size AAA (not included)
OPERATING TEMPERATURE 0°C ~ +40°C
STORAGE TEMPERATURE -10°C ~ +60°C
Mode
Display
Functions:
Scan / Speed / Distance /
Time / Calories/ Odometer
/ Pulse
Warning ! Heart rate monitoring systems may be inaccurate. For the most accurate
heart rate measure, please hold both hand pulse sensors continuously during any
programme. The console will display your heart rate in beats per minute (BPM)
after 4 seconds.
The measurement value can not be regarded as the basis of medical treatment.
NOTE
：
Speed,