opti-solar SP3000 Vigor Скачать руководство пользователя страница 5

 

 

 

WARNING! Before installing and using this inverter, read all instructions and cautionary 
markings on the inverter and all appropriate sections of this guide.   

 

WARNING! Normally grounded conductors may be ungrounded and energized when a 
ground fault is indicated.   

 

WARNING! This inverter is heavy. It should be lifted by at least two persons. 

 

CAUTION! Authorized service personnel should reduce the risk of electrical shock by 
disconnecting both the AC and DC power from the inverter before attempting any 
maintenance or cleaning or working on any circuits connected to the inverter. Turning off 
controls will not reduce this risk. Internal capacitors can remain charged for 5 minutes after 
disconnecting all sources of power. 

 

CAUTION! Do not disassemble this inverter yourself. It contains no user-serviceable parts. 
Attempt to service this inverter yourself may cause a risk of electrical shock or fire and will 
void the warranty from the manufacturer.   

 

CAUTION! To avoid a risk of fire and electric shock, make sure that existing wiring is in good 
condition and that the wire is not undersized. Do not operate the Inverter with damaged or 
substandard wiring. 

 

CAUTION! Under high temperature environment, heat sink of this inverter could be hot 
enough to cause skin burns if accidentally touched. Ensure that this inverter is away from 
normal traffic areas. 

 

CAUTION! Use only recommended accessories from installer. Otherwise, not-qualified tools 
may cause a risk of fire, electric shock, or injury to persons. 

 

CAUTION! To reduce risk of fire hazard, do not cover or obstruct the heat sink. 

 

CAUTION! Do not operate the Inverter if it has received a sharp blow, been dropped, or 
otherwise damaged in any way. If the Inverter is damaged, called for an RMA (Return Material 
Authorization). 
 

Содержание SP3000 Vigor



























Отзывы: