opti-solar MSS-20 Super, Руководство пользователя

Страница: 3 / 7

System setup
●
Solar power system default setting:
。
Main power switch: off
。
Main power fuse: open
(Accessory parts)
●
Insert the main power fuse
●
Turn the main power switch on
●
Connect the solar panel
System status
●
Battery level LED indicator
。
Green - The battery power is at full
。
Orange - The battery power is half-charged
。
Red - The battery power is low
。
Red flash - Indicates that the battery will enter into low power protection mode
(The red light flashes for 15 seconds and then the system automatically
shuts down)
。
LED is not lighting up - The system
will fail or won’t start at all.
>< Before using the solar power system, please make sure the battery is fully
charged.
>< After switching on this solar power system, please keep the battery charging
>< The solar power system is running and the battery level LED indicator shows a
steadily red light:
# Charge the battery
# If necessary, reduce the load or turn off some of the connected loads
>< The solar power system is running and the battery level LED indicator is flashing
red:
# After 15 seconds of flashing, the system will automatically shut down
# Disconnect all the loads and charge the system
# When the LED indicator light is orange (mid of battery level), you can
restart the system and connect the loads.
>< If the solar power system is stored over a long period, please supply power to
the system for at least 15 days. If unused for longer periods, please fully
charge the system and keep it fully charged for 15 days
●
Charge status LED indicator
。
Green - Indicates that the battery is fully charged
。
Green flash - Indicates that the battery is charging
。
Red - Indicates that the solar power input voltage is too high (The system
automatically cuts off the load)
。
LED is not lighting up - Indicates that the solar panel is not connected or the solar
power input voltage is too low