Relay Setting
18
Maintenance output setting
Set an output when a malfunction such as sensor failure or disconnection
occurs.
Set a maintenance timer for any cycle (“Maintenance timer” P.29) to notify
the user when the set period has elapsed.
Use this for notification of sensor maintenance, replacement of
consumables, and overhaul timing.
Check notifications by the relay output and dedicated cloud server (SC-U1
and GW connected).
For more information about checking notifications on the cloud server, refer
to the cloud server’s help.
Self Checking output setting
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "5.4 Relay Setting" and "
◆
Self Checking output setting".
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "5.4 Relay Setting" and "
◆
Maintenance output setting".
