-2-
(Orange)
(Orange)
(Yellow)
(Yellow)
(Green)
(Green)
(Red)
(Black)
POWER
OUTPUT
24VDC
(Blue)
(Blue)
(Purple)
(Purple)
RECEIVER AND RECEIVER
5
<Receiver 1>
(1)
(2)
(3)
(4) N.O.
(5) N.C.
(6) COM.
(7)
(8)
(9)
POWER INPUT
10.5-30VDC
SPARE
ALARM OUTPUT
TAMPER OUTPUT
(N.C.)
SPARE
<Receiver 2>
(1)
(2)
(3)
(4) N.O.
(5) N.C.
(6) COM.
(7)
(8)
(9)
POWER INPUT
10.5-30VDC
SPARE
ALARM OUTPUT
TAMPER OUTPUT
(N.C.)
SPARE
Caution
･
An alarm output of receiver 2 and purple wire of PIE-1 must be connected inside the back box.
･
Make sure that the wires do not contact the terminal block or do not contact each other by cutting unnecessary wires.
･
The wiring length other than accessories must be up to 2.5 m. (Wire size: at least AWG26 (0.13 mm
2
))
･
If wiring cannot be secured, use a crimping terminal to secure wiring.
･
A PIE-1 can supply power and provide alarm monitoring to up to two detectors.
<Transmitter>
(1)
(2) -
(3)
(7)
(8)
(9)
POWER INPUT
10.5-30VDC
SPARE
TAMPER OUTPUT
(N.C.)
SPARE
<Transmitter>
(1)
(2)
(3)
(7)
(8)
(9)
POWER INPUT
10.5-30VDC
SPARE
TAMPER OUTPUT
(N.C.)
SPARE
<Transmitter>
(1)
(2)
(3)
(7)
(8)
(9)
POWER INPUT
10.5-30VDC
SPARE
TAMPER OUTPUT
(N.C.)
SPARE
(Orange)
(Orange)
(Yellow)
(Yellow)
(Green)
(Green)
(Red)
- (Black)
POWER
OUTPUT
24VDC
(Blue)
(Blue)
(Purple)
(Purple)
<Transmitter>
(1)
(2)
(3)
(7)
(8)
(9)
POWER INPUT
10.5-30VDC
SPARE
TAMPER OUTPUT
(N.C.)
SPARE
<Receiver>
(1) +
(2) -
(3)
(4) N.O.
(5) N.C.
(6) COM.
(7)
(8)
(9)
POWER INPUT
10.5-30VDC
SPARE
ALARM OUTPUT
TAMPER OUTPUT
(N.C.)
SPARE
(Orange)
(Orange)
(Yellow)
(Yellow)
(Green)
(Green)
+ (Red)
- (Black)
POWER
OUTPUT
24VDC
(Blue)
(Blue)
(Purple)
(Purple)
<Receiver>
(1)
(2) -
-
(3)
(4) N.O.
(5) N.C.
(6) COM.
(7)
(8)
(9)
POWER INPUT
10.5-30VDC
SPARE
ALARM OUTPUT
TAMPER OUTPUT
(N.C.)
SPARE
(Orange)
(Orange)
(Yellow)
(Yellow)
(Green)
(Green)
+ (Red)
- (Black)
POWER
OUTPUT
24VDC
(Blue)
(Blue)
(Purple)
(Purple)
RECEIVER ONLY
1
TRANSMITTER ONLY
2
TRANSMITTER AND RECEIVER
3
TRANSMITTER AND TRANSMITTER
4
(Orange)
(Orange)
(Yellow)
(Yellow)
(Green)
(Green)
(Red)
(Black)
POWER
OUTPUT
24VDC
(Blue)
(Blue)
(Purple)
(Purple)
WIRING
3
+
+
+
+
-
+
-
+
-
+
-
+
-
+
-
+
Note >>
･
The mark on the wiring diagrams indicates that
the wire should be cut off.
･
The solid lines on the wiring diagrams indicate provided
cables. For dotted lines, purchase the cable separately.
When connecting the lead wires to the wiring, make the
connection using the connector or soldering. Insert the
wires into the connector and tighten the connections with
pliers.
Connector
(not included)
Note >>
･
For the detector without
back box, tighten the
cables with the banding
band.
