- Detection area
Others
- Specifications
FCC notification
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed andused in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
Personal Information
This product is equipped with the function to produce moving and/or still image of the designated area and its surrounding
and can store the recorded imagewhich includes the information such as face of an individual that could identify the
individual. Prior to the installation of this product, the compliance to local laws and regulations needs to be confirmed by the
user of this product for the lawful installation and use of this product, and signage and notification when using this product.
User of this product is deemed to be responsible for the compliance of any laws and regulations relating to personal
information, privacy protection and rights of portrait upon use of this product. Image taken by this product is required to be
treated appropriately under the responsibility of the user of this product. OPTEX Co., Ltd. and its subsidiaries (hereinafter
collectively called “OPTEX") shall not wilfully obtain or utilise the image taken by this product. However, only when dealing
with troubles of this product upon request of user, OPTEX may obtain and utilize the necessary image recorded by this
product. When doing so, OPTEX shall not treat such image for the purpose of identifying an individual. OPTEX shall treat
such image according to its Privacy Policy. When requesting OPTEX to support a trouble of this product, the user may be
required to perform applicable legal notification. Ensure to follow the appropriate procedure prior to sharing of personal
information and data to OPTEX. Installation of this product, producing image, monitoring, recording with camera and
handling of personal information or data shall all be performed under discretion and responsibility of user of this product,
and OPTEX shall not be held liable for any dispute between a user and a third party.
- Compliance
About distribution of source code for open source software
This product includes open source software
（
” OSS”
）
distributed under OSS License. In compliance with the OSS Licenses
such as GPL (GNU GENERAL PUBLIC LICENSE), LGPL (GNU LESSERGENERAL PUBLIC LICENSE), and/or others
included, we are making the source code of the OSS available, at the actual cost, to our customer upon his/her request.
The source code corresponding to OSS included in this product will be provided in a prescribed manner for at least than
three(3) years after the date of purchase. Please note that the OSS is provided without warranty of any kind.
4
Distributed by
OPTEX INC./AMERICAS HQ (U.S.)
www.optexamerica.com
Top view
Side view
0 2 4 6 8 10 m
10 m
8
6
4
2
0
2
4
6
8
10
0 5 10 15 20 25 30 ft.
0 2 4 6 8 10 m
2 m
1
0 5 10 15 20 25 30 ft.
30 ft
25
20
15
10
5
0
5
10
15
20
25
30
8 ft.
6.6
4
120°
Unit: mm (inch)
- Dimensions
87.6 (3.45)
114 (4.49)
96.8 (3.81)
60 (2.36)
72.1 (2.84)
- LED indicator
• Specifications and designs are subject to change without prior notice.
• These units are designed to detect an intruder and activate an alarm control panel. Being only a part of a complete system,
we cannot accept responsibility for any damages or other consequences resulting from an intrusion.
Passive infrared
Up to 10m, 120° angle of view
Model
PIR Detection
Detection method
PIR coverage
INS-CUBE
1/2.8" Progressive Scan CMOS
2.8mm, F1.6
0.035 lux, AGC on/0 lux with IR (F1.6)
Up to 10m
110°
IR cut filter with auto switch
1/15 s to 1/32,000 s
Camera
Image sensor
Lens
Min. illumination
IR range
Angle of view
Day/Night
Shutter times
1,920 x 1,080
60 Hz, 30 fps
3D DNR
Ture WDR
Rotate mode, Saturation, Brightness,
Contrast, Sharpness, AGC, ROI
H.264, H.265, MJPEG
100 kbps to 10 Mbps
G.711
Image and compression
Max. image resolu
ti
on
Frame rate
Digital noise reduction
Wide dynamic range
Image set
ti
ng
Video compression
Video bit rate
Audio compression
Environmental and mechanical
Operarion temperature
Environmental humidity
Dimensions
Weight
IEEE 802.11.b, 802.11g, 802.11n
2.4 GHz to 2.4835 GHz
20 MHz support
802.11b: CCK, QPSK, BPSK
802.11g/n: OFDM
64/128 bit WEP, WPA/WPA2,
WPA-PSK/WPA2-PSk, WPS
25 m (Dependent upou environment)
Wi-Fi
Wireless standard
Frequency range
Channel bandwidth
Protocols
Security
Wireless range
12 V DC
±
10%, PoE (802.3af)
12 V DC 6.4 W, PoE (802.3af) 6.8 W
1 RJ45 10 M/100 M Ethernet port
Built-in microphone
Built-in speaker
1 channel signal
1 channel signal
Electrical and interface
Power supply
Power consumption
Communications
Audio input
Audio output
Alarm output (N.O./N.C.)
Tamper alarm (switch)
-20°C - 50°C (-4°F - 122°F)
90% max
87.6 mm x 114 mm x 72.1 mm
297 g
PIR detection, Network disconnect
IP address conflict, Storage exception
Temperature critical, Audio detection
Built-in Micro SD, SDHC, SDXC
card slot, up to 128 GB
One-key reset, Flash-prevention,
Dual stream, Password protection,
Privacy mask, IP address filtering,
Anonymous access
TCP/IP, ICMP, HTTP, HTTPS, DHCP,
DNS, DDNS, RTP, RTSP, RTCP, NTP,
UPnP, SNMP, IGMP, 802.1X, QoS,
IPv6, Bonjour
Functions
Alarm triggers
Local storage
Security
Protocols
Camera
PIR
[1] ALARM
[2] STATUS
[3] LINK
Wired LAN
Wi-Fi
Warm-up
PIR
detection Stand-by
0.5 s intrval
1 s interval
Blue
Red
Green
Blue
Yellow
Yellow
Yellow
Yellow
Yellow
Yellow
