11
VLAN Control and VLAN Port Control
Before any entry on this page is made, the list on the VLAN Entries page must be filled in.
If - in the VLAN Control pane - the VLAN Enable box is checked, it is possible to add, remove or modify Q-
tags in packets, according to the ingress rules set in the VLAN
Port
Control pane (see figures 8 and 11).
If VLANs are enabled, the following ingress options are available:
-
incoming Q-tagged frames
can be modified as follows (see figure 9):
-
they can be left as they are
-
the VLAN ID can be changed
-
both VLAN and priority can be changed.
This can be done with the ‘Q-frame’ selection box (see figure 9 below):
Figure 8. 2800 SW VLAN control and Port Control settings
Figure 9. 2800 SW VLAN Control , Q-frame menu options
