Optelec
English
Page 39
Mode of operation: Continuous Operation
The equipment not suitable for use in the presence of a flammable anesthetic
mixture with air or with oxygen or nitrous oxide: Not AP or APG Category:
Product Specifications:
Specifications
Power Adapter
Input Voltage Range: 100 – 240 VAC
Input Frequency Range: 50 – 60 Hertz
Fuse: Internal and not user replaceable
Power Output: 5V 1.5A
Max Input AC Current: 90-264VAC 0.3A
Environment
Operating Temperature: +0
℃
~ +40
℃
Conditions
Storage/Transportation
Temperature
:
-20
℃
~ +60
℃
Operation Relative Humidity: 20% ~80% Non-Condensing
Storage/Transportation
Relative Humidity
:
10% ~95% Non-Condensing
Atmospheric pressure: 500~1060 hPa
FCC :
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced technician for help.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
