Opsytec UVpad E, Руководство пользователя

Страница: 7 / 37

6 Intended Use 7
6 Intended Use
The UVpad E determines the irradiance in the UV and VIS spectral range and indicates
these on the integrated display. Typical Applications:
- Measurement of UV-LEDs and ultraviolet lamps
- UV dose measurements
- Universal irradiance measurement
- GMP and IQ/OQ documentation
7 Conventional Use
The UVpad E is solely intended for the determination and visualization of irradiances, which are
generated in UV curing systems.
The UVpad E is battery operated and suitable for usage with lithium batteries, type CR2032. In
case other batteries, than the supplied ones, are used, an operating range of up to 70 °C has to be
observed. Spare batteries are to be obtained from your supplier.
Operation only allowed in dry environments. The assembly position is arbitrary.
When using the UVpad E, light and UV radiation can be reflected and distributed at the housing.
Appropriate protection measures for the protection against radiation need to be applied, if neces-
sary. Note: The UVpad E itself does not emit any hazardous radiation.
The housing, with the exception of the battery compartment, must not be opened by the user.
The optically active surface must not be touched.
Gloves need to be worn when cleaning the optically active surface.
The UVpad E is a highly sensitive optical measurement device. It must not be exposed to shocks.
Any other usage than the one described above leads to a damage of the product. Furthermore, this
involves risks, such as short-circuits, fire and electric shocks. The entire device must not be modi-
fied and/or remodeled! The safety indications are to be observed without fail.
optically active surface