LBL-2008-41-v5 OptoMonitor 3 IFU_en Rev 2021-08
24
|
P a g e
AUX In (AUX Interface Cable)
Mandatory unless using AO Transducer Interface cable (3.2.2). Provides Optical Unit with Pa readings
from the Cathlab Hemodynamic System. . If the Aortic Transducer cable is used, this cable can be used
to provide an ECG signal to the Optical Unit. Cable model depends on your current Cathlab
Hemodynamic System.
Aortic In (AO Transducer Interface Cable)
Mandatory unless using AUX Interface cable (3.2.1). Provides Optical Unit with Pa readings directly from
the Aortic Transducer, making the OptoMonitor 3 a more independent device. Cable model depends on
your current Aortic Transducer system.
Aortic Out (Pressure Output Interface Cable)
Mandatory if using the AO Transducer Interface Cable (3.2.2), otherwise optional. Sends Pa readings to
your Cathlab Hemodynamic System. Cable model depends on your current Cathlab Hemodynamic
System.
Distal Out (Pressure Output Interface Cable)
Optional. Sends Pd readings obtained from OptoWire to the hemodynamic system in the Cathlab. Cable
model depends on your current Cathlab Hemodynamic System.
OptoMonitor 3 Display Unit (OpM3-DU)
.
