Opsens F2300 Series Скачать руководство пользователя страница 105

Страница: 105 / 122

LBL-2019-41-v4 OptoMonitor 3 IFU wTAVI_en Rev 2022-03

105

P a g e

10.2

Leakage Current Measurement

The OptoMonitor 3 is a fiber optic platform-based system. Perform measurement of device leakage

current per hospital standard procedure.

10.3

Visual Inspection

10.3.1

General Routine Inspection

You should perform a visual inspection before every use, or in accordance with your hospital’s policy.

With the OptoMonitor 3 switched off:

•

Examine unit exteriors for cleanliness and general physical condition. Make sure that the housings

are not cracked or broken, that everything is present, that there are no spilled liquids and that

there are no signs of abuse.

•

Make sure all cables connected to the OptoMonitor 3 are locked into place and do not pull out

without releasing the locking mechanism.

•

Inspect all accessories (cables, pressure guidewire and so forth). If any signs of damage are

observed, do not use.

•

Inspect all cables and their strain reliefs for general condition. Make sure there are no breaks in

the insulation. Make sure that the connectors are properly engaged at each end to prevent

rotation or other strain.

10.3.2

Annual Visual Inspection

The OptoMonitor 3 and its components should be carefully inspected once every 12 months.

•

Carefully inspect the equipment for physical damage to the case, the display screen, and the

keypad. Do not use the OptoMonitor 3 if damage is determined. Refer damaged equipment to

qualified service personnel.

•

Inspect all external connections for loose connectors or frayed cables. Have any damaged

connectors or cables replaced by qualified service personnel.

Handle Unit – Optical connector (Male)

Optical Unit – Female Optical Connector

Содержание F2300 Series



























































































































Результаты поиска

Содержание F2300 Series

Отзывы:

Opsens F2300 Series, Инструкция по эксплуатации, Страница: 105 / 122

Результаты поиска

Содержание F2300 Series

Отзывы: