Front EPP Pad
Fitband Comfort Pad
2
DETACH FITBAND
Place your index finger behind the center of
the Fitband Comfort Pad and carefully bend
away from the Front EPP Pad as shown. Pinch the
Fitband Comfort Pad and use your thumb to slide
the pad sideways ½” towards the center of the helmet
along the Front EPP Pad. Repeat on both sides until the pad
is released from the key slots.
NOTE: DO NOT PULL THE FITBAND COMFORT PAD AWAY
FROM THE FRONT EPP PAD OR YOU MAY BREAK THE
FRONT EPP PAD KEY SLOTS.
COMMs HEADSET
The liner system is compatible with a variety of COMMs headsets and hearing protection devices. Instructions
for use with headband style COMMs is below.
1
RELOCATE TOP PADS
Position the top pads in the helmet so there is enough space for
the headband of the headset to sit in between them.
3
INSERT HEADBAND
Flip the Comfort Pad / Fitband away from the front
impact liner and slide the headset headband around
it as shown. This will position the headset’s headband
on the outside of the helmet Fitband so that it does
not create a pressure point when you tighten the
Occ-Dial Adjustment Knob.
4
REATTCH FITBAND
Reattach the Comfort Pad / Fitband to the key-slots in the front
impact liner by bending the pad in the center and pushing on the
rivets (one at a time) with your thumb while at the same time
sliding them toward the sides of the helmet.
14
