Oppo BDP-103EU, Руководство пользователя

Страница: 14 / 92

I N S T A L L A T I O N
10
Changing the Remote Code
The remote control contains three OPPO remote codes. The default is “Code 1”. If you have other OPPO
products placed close to the BDP-103EU, they may inadvertently respond to the BDP-103EU remote control.
To prevent this, you can select a different remote code.
To select a new remote code, open the battery compartment cover of the remote control, and then use a ball
point pen to flip the switch to one of the positions marked as “1”, “2”, or “3”. Close the battery compartment
Remote Code Switch
Battery Compartment
Changing the Backlight Method
The remote control supports one of two backlight methods. By default, pressing the LIGHT button will
turn on the backlight, and pressing any other button within 10 seconds will keep the backlight on. The
alternative method will activate the backlight whenever any button is pressed; in this mode, the light will
stay on for 10 seconds, and pressing any other button will keep the backlight on. To switch between
these two backlight methods, press and hold the LIGHT button for 5 seconds.
CAUTION
• Never drop the remote control or expose it to moisture.
• Never expose the infrared remote sensor on the front panel to direct sunlight or other
strong light sources.
• Remote may not operate consistently when batteries become low. Replace them if
operation deteriorates.
• If the remote control will not be used for a long time, please remove the batteries.
•
Use the batteries correctly to avoid possible leakage and corrosion. Do not leave the
batteries exposed to direct sunlight or in a high temperature environment for a long period
of time. Do not heat or expose to flame. Do not mix old and new batteries. Do not use
batteries of different types at the same time. Do not attempt to recharge the batteries.
• If battery leakage occurs, do not touch the liquid with bare hands. Wipe out any liquid inside
the battery compartment, and insert new batteries.
cover. Make sure that the BDP-103EU player is turned on and that the disc tray is ejected. Aim the remote
control at the player. Press and hold the
ENTER
button for 5 seconds. The player will start using the new
remote code.