Now the kit is ready for operation. This is how to use the kit:
By default, your bluray player is region free for DVD. To set the bluray region to A, B or C,
please do the following:
1.
Power on the player without any disc inserted. The screen will after a
while show “No Disc”.
2.
About 4 seconds after the “No Disc” or “HOME MENU” displayed, press DIMMER,
DIMMER, DIMMER, MUTE and then the region code. 1 for A, 2 for B, and 3 for C.
3.
Power off your player. When started up again, the regioncode has changed.
The region code selection must be done within 20 seconds.
Your players firmware must be the BDP103-38-1211 release, or newer.
To select a specific DVD region, press DIMMER , DIMMER , DIMMER , PURE AUDIO, x
Where x is the DVD region 0 to 6. Default is 0 (all regions / regionfree)
