background image

1

E113211#1

113.211

R a t t l e   S n a k e

Tools required: 

 

Wood Glue,

Paints and Brush (acrylic paint), 

conceivably transparent varnish

PARTS LIST  

Quantity

  Size (mm) 

Description

  

Part-Nr

Plywood

12

50x50x6

Segments Snake Body

1

Satin Ribbon red

1

1100

Segment Connection

2

Satin Ribbon green

1

650

Segment Connection

3

Sandpaper fine

1

120x65

Sandpaper coarse

1

120x65

Please note

The OPITEC handicraft packs are not toys in a typical 

off-the-shelf sense, but rather additional teaching and 

learning material for educational purposes. This craft 

pack may only be constructed by children and adole-

scents under the guidance and supervision of experi-

enced adults.

Not suitable for children under 36 months. Choking 

hazard!

Содержание Rattle Snake

Страница 1: ...nnection 2 Satin Ribbon green 1 650 Segment Connection 3 Sandpaper fine 1 120x65 Sandpaper coarse 1 120x65 Please note The OPITEC handicraft packs are not toys in a typical off the shelf sense but rather additional teaching and learning material for educational purposes This craft pack may only be constructed by children and adole scents under the guidance and supervision of experi enced adults No...

Страница 2: ...red ribbon in half using scissors red ribbon red ribbon green ribbon red ribbon green ribbon Front view green ribbon red ribbon red ribbon red ribbon green ribbon A B After the glue has set guide the red ribbons under neath segment 1 so that both red ribbons point in the same direction like the green ribbon Glue the two red ribbons as illustrated to the bottom of the 2 segment keeping the same dis...

Страница 3: ...the second part of segment 3 as illustrated Let the glue set thoroughly Then lie the red ribbons over the segment so that they point in the same direction as the green one green ribbon green ribbon red ribbon red ribbon D red ribbon Turn around segment 1 2 3 Place the ribbons on the segment Put the lower part of the 4th segment onto the green ribbon at a distance of 3 5 to 4 cm to segment 3 Stick ...

Страница 4: ... distance of 3 5 to 4 cm to segment 5 Stick the red ribbons as illustrated Guide the green ribbon upwards and stick them centrally between the red ribbons Affix the cover of the 6th segment using glue and let it set thoroughly Cut off the protruding ribbons segment 6 Glue the wiggle eyes onto segment 1 using the protruding green ribbon Done glue eyes How it works Hold the rattle snake at the thin ...

Отзывы: