Opitec 120.852, Руководство по сборке

Страница: 4 / 9

4
12
Attach the seat (1c) to the base plate using a screw (8), a washer (11)
and a nut (9) as shown.
Building Instruction 120.852
Aluminium Trike with Gear Motor
1c
8
11
9
13
Fasten the front spoiler (1f) from below and the bracket (1g) for the
bonnet from above with 2 screws (8), 4 washers and 2 nuts (9) as
shown.
1f
8
11
9
1g
11
15
Screw the bonnet (1b) to the bracket with 2 screws (8), 2 washers (11)
and 2 nuts (9) as shown.
1b
8
11
9
16
Solder the red cable of the battery holder to the + pole (recess in
the motor housing) and the black cable to the - pole of the geared
motor.
Mpole
17
Insert two screws (7) through the holes of the geared motor and screw
on and tighten one nut (9) each from the opposite side. Then insert
the screws through the holes in the gear holder and fasten from the
outside with a washer (11) and a stop nut (10) each.
14
Glue the acrylic glass pane (6) to the intended adhesive surface of the
bonnet (15) with superglue as shown.
7
10
11
9
1b
6
6
1b