Opitec 115855, Быстрый старт

Страница: 1 / 9

1
E115855#1
115855
B i - P o w e r - S p e e d y w i t h W i r e d
R e m o t e C o n t r o l
Contents list
Qty Dimensions(mm) Designation Part no.
Plywood 1 200x100x5 Construction control 1
Plywood 1 200x80x8 Construction vehicle 2
Grey Cardboard 1 210x150x1 Construction vehicle 3
Hard Paper Pipe 1 ø 19,5x300 Exhaust 4
Wooden Wheel 1 ø 30 Wheel Rear Axle 5
Impeller 2 ø 45 Wheel Front Axle 6
Wooden Strip 1 350x25x10 Composition Controling 7
Motor 2 Drive 8
Bow 2 21 Attachment Motor 9
Brass Case 1 ø4 x 8 Axle-Box Back Wheel 10
Reducer 2 3/2 Reduction Motor Shaft 11
Push Button 2 Control 12
Slide Switch 1 36x13, 6-polig Switch 13
Tapping Screw 1 2,9x25 Rear Axle 14
Tapping Screw 8 2,9x9,5 Screwing 15
Blade Receptacle 2 Battery Connector 16
Washer 6 7/3,2 Washer 17
Cable red 2 2000 Cabling 18
Cable black 2 2000 Cabling 19
Please Note
The OPITEC range of projects is not intended as play toys for young
children. They are teaching aids for young people learning the skills
of craft, design and technology. These projects should only be un-
dertaken and operated with the guidance of a fully qualified adult.
The finished projects are not suitable to give to children under 3
years old. Some parts can be swallowed. Danger of suffocation!
Required Tools:
sand paper
fine saw or scroll saw
scissor, ruler, pencil
drill ø2.5, ø4, ø 7, ø10mm
wood glue and all purpose adhesive
modeling knife
soldering iron, solder flux