W i n d g e n e r a t o r
103.410
Parts list
- 1x Jumbo Light Diode
- 1x Solar motor
- 1x Spring clip
- 1x Reducer 4/2 mm
- 2x Pulley ø 15 mm
- 2x Pulley ø 60 mm
- 1x Wooden disc ø 40 mm
- 1x Hand crank
- 1x Vacuum plastic, transparent, DIN A4
- 2x Brass sleeve ø 6/4 x 20 mm
- 2x Machine screw 4 x 70 mm
- 10x Nuts M4
- 10x Washers M4
- 2x Drawing pins
- 1x Screws 3 x 12 mm
- 2x Rubber bands ø 90 x 1 mm
- 1x Wooden base 15 x 100 x 150 mm
- 1x Wooden base 20 x 20 x 350 mm
Necessary tools
Ruler, pencil
Hacksaw, wood saw
Drills ø 4 + ø 5 mm
Spanner 7 mm
Screwdriver
Crosshead screwdriver
Scissors
Hole punch
Please Note
The OPITEC range of projects is not intended as play toys for young children.They
are teaching aids for young people learning the skills of Craft, Design and Technolo-
gy.These projects should only be undertaken and tested with the guidance of a fully
qualified adult. The finished projects are not suitable to give to children under 3
years old. Some parts can be swallowed. Dan- ger of suffocation!
