User’s Guide
Installation
Application
4. Connect the in5V DC power supply into the Transmitter.
5. Connect the in5V DC power supply into the Receiver.
6. Blue LED indicator on the modules will be light up
after all connections are completed.
NOTE
: The Transmitter and the Receiver modules must be connected to the
included power supplies for proper operation.
Transmitter module must be powered on first.
▶
Trouble shooting
depending on LED indicator status
No display
TX
Solid /
RX
Blink
Check if monitor is powered on
Check if DisplayPort source is selected on monitor input setting
No display
TX
Blink /
RX
Solid
Check if the PC and display are powered on and properly booted.
Check if optic fiber is connected properly.
No display
TX
Blink /
RX
Blink
Please make sure that power supply is connected into TX and RX.
Reset the system by de-plugging and re-plugging all connection.
DC +5V
Power jack