RX 5 T |
Instruction manual
20
6. Mounting of the dispenser
If the dispenser is to be mounted on a wall please follow the
instructions listed below:
Fix the ingo-man backplate to the wall using the wall plugs & screws
provided (fig. 1).
Push the wall mount to the wall and slide down over ingo-man
backplate until the spring tongue is engaged (fig. 2).
•
Check the suitability of the wall before mounting!
•
Do not install the appliance in narrow entrances and passage-
ways!
•
When choosing where to mount the appliance, please consider
ease of access for filling!
•
Mount the appliance on the wall using the enclosed fixings or
other suitable fixings.
•
The dispenser must be mounted to the fixing apertures provided
on a non-sloping wall using at least 3 screws.
•
Microwaves or fluorescent tubes can cause electromagnetic
interference. If this is the case, please remove the source of the
interference. This will restore the device to problem-free operation.
6. Mounting the dispenser
6.1
Wall mounting
The dispenser has the option of being free standing or wall mounted.
If free standing please ensure that:
•
The surface is level and secure
•
It is clear of any passing or moving objects
•
If the dispenser is knocked any spillage should not affect nearby equipment
1
2
NOTICE
