-
INFINITE SUSTAIN, in this mode when SAMPLE is long pressed for 1 second it switches to INFINITE SUSTAIN.
Each new sampled note is sustained indefinitely until a new note is sampled or BYPASS is pushed. Pushing
BYPASS erases sampled notes.
To switch between CONTINUOUS SAMPLING and INFINITE SUSTAIN long press SAMPLE
at same time for 3 seconds. ORANGE LED will blink to indicate successful change.
ENVELOPE FOLLOWER/INFINITE SUSTAIN modes
Sampled notes can be played back either by ENVELOPE FOLLOWER or INFINITE SUSTAIN mode
ENVELOPE FOLLOWER tracks the input signal, sampled notes are played back when you’re playing and only stop when
you stop playing. In this mode ORANGE LED is normally OFF and only turns ON when you push SAMPLE footswitch.
INFINITE SUSTAIN doesn’t track the input signal and plays the sampled note indefinitely until you sample a new note
and only stops when push BYPASS. In this mode ORANGE LED is normally ON and only turns OFF when you push
SAMPLE footswitch.
TRACKING setting
Tracking can be set to:
-
Help low tuned guitars to cope better with ASTEROIDE
-
Increase/decrease the tracking range
4 tracking ranges can be set.
To set a new tracking: set the pedal in ON mode (
RED LED ON
). Long press
BYPASS
for 3
seconds,
RED LED
will turn OFF and turn ON again. Move the
FUNDAMENTAL
pot to set a new
tracking option.
Red LED
will start blinking at rate of 1 second. When a new
TRACKING
option
is selected the
ORANGE LED
will blink.
You can play through the pedal and
SAMPLE
notes to test various tracking options.
Once done press BYPASS to store current tracking and exit.
When FUNDAMENTAL is moved CCW the tracking range is decreased. When FUNDAMENTAL is moved CW the tracking
range is increased.
MONO/SPLIT Output
With a Y jack cable connected at OUT you can separate DRY signal from effect signal for connecting two amps or to
process signals independently.
TIP of the jack carries DRY signal while RING of the jack carries effect signal:
When signal splitting is desired set MIX knob at zero.
